Principal,

National Institute of Textile Engineering and Research (NITER)

Name: 
Dr. Mohammed Mizanur Rahman
Designation: 
Professor 
Qualification: 
Ph.D (Materials and Life Sciences), Kumamoto University JAPAN
Humboldt (Germany) & JSPS (Japan) Fellow
Email: This email address is being protected from spambots. You need JavaScript enabled to view it. 

Details:

Mohammed Mizanur Rahman, PhD

(AvH and JSPS Fellow)

Professor

Department of Applied Chemistry and Chemical Engineering

Honourable syndicate member

University of Dhaka, Dhaka-1000, BANGLADESH

TEL: +880-2-9661920-70/7392 (O), 

Room No. 306, Curzon Hall

Email: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Post Doctoral Fellowship:

 

Host: Professor Dr. Torsten C. Schmidt, Department of Instrumental Analytical Chemistry, University of Duisburg-Essen, Germany.

 

Host: Professor Hirotaka Ihara, Department of Applied Chemistry and Biochemistry, Kumamoto University, Japan.

 

 

Awards and Achievements:

 

  • Young Researcher Award-2009(Gold Medalist in Physical Sciences), Bangladesh Academy of Science (BAS), Bangladesh.

 

  • Young Scientist Prize-2009(Physical Sciences), Third World Academy of Science (TWAS), Trieste, Italy

 

  • Young Researcher Award-2005, Kumamoto University, Japan

 

  • Young Scientist Award-2004, Inoue Science Promotion Foundation, Tokyo, Japan

 

  • Japanese Govt. Monbukagakusho Scholarship (2002) Award.

 

  • Primary Scholarship Award (1983) by the Ministry Education, Bangladesh

 

 

 

Employment History:

  • 3/2014-to date

 

Professor, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka-1000, Bangladesh.

  • 2/2011-2/2014

Associate Professor, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka-1000, Bangladesh.

  • 1/2009-1/2011

Assistant Professor, Department of Applied Chemistry and Chemical Engineering, University of Dhaka, Dhaka-1000, Bangladesh.

  • 9/2006-12/2008

Lecturer, Department of Applied Chemistry and Chemical Technology, University of Dhaka, Dhaka-1000, Bangladesh.

  • 3/2000-8/2006

Lecturer, Department of Chemistry, Dhaka University of Engineering and Technology (DUET), Gazipur-1700, Bangladesh.

 

 

 

 

Representative Publications: Published over 90 articles in Refereed journals, books and conferences.

Reviewers: Reviewer of over 100 peer reviewed journals in American Chemical Society, Wiley-Verlag, Wiley and Sons, Elsevier, Sage, Taylor and Francis and Springer etc.

 “h” index: 14

Total Citations: 850

 

 

Research Experiences and Interests:

  • Ionic liquid based materials for in-needle and solid phase in needle microextraction, GC stationary phases and development of method for GC/MS
  • Ionic liquid for solar cell and in environmental applications
  • Bio-inspired nanomaterials for tissue engineering
  • Organic and inorganic nanomaterials and hybrid materials for technological applications
  • Biomaterials for biomedical application, biomimitic bio-composite fabrication from polysaccharides, polyamides, proteins and other renewable resources
  • Nanocrystals and nano-composites for environmental applications.
  • Stationary phases for HPLC, HILIC by conventional radical and surface initiated controlled radical polymerization techniques
  • Biomaterials scaffolds bilayer membrane for biomedical applications such as in wound healing and implant
  • Nanocomposites, nanomaterials and bioadsorbent for heavy metal removal from waste water or ground water
  • Safe uses of radiation processing technologies for food sterilization, medical equipments and materials and effluent treatment

 

Professional Affiliations:

  1. Life Member (LM-715),Bangladesh Chemical Society, Bangladesh.
  2. Member, Bangladesh association for the advancement of science (BAAS), Bangladesh.
  3. Member (No.2040725600),The Chemical Society of Japan.
  4. Member,Bangladesh Academy of Science (BAS), Bangladesh.
  5. Life member,JSPS alumni association of Bangladesh.
  6. Life member,Alexander von Humboldt (AvH) fellows association of Bangladesh.

 

Research Grants:

  1. Received 6,00,000 BDT from the Ministry of Science and Technology of Bangladesh (completed).
  2. Obtained 15,00,000 BDT from the ministry of science and technology of Bangladesh for a research project on the “Development of porous bilayer scaffold membrane for skin tissue engineering” (completed).
  3. Received 12,000 USD research grant for one year (2010) from International Foundation for Science (IFS), Sweden. (http://www.ifs.se/)for individual research for the project “Extraction of chitosan from waste prawn or crab shell and preparation of stimuli responsive gel for application in wound healing and for artificial skin preparation” (completed).
  4. Received 1,00,000 BDT from University Grants Commission of Bangladesh (completed).
  5. Obtained 900,000 Japanese yen from Japan Society for the Promotion of Science during JSPS’s postdoctoral research in Japan (2006-2008) which is highly competitive (completed).
  6. Received 7500 USD for one year (July 2010-June 2011) from Third World Academy of Science (TWAS) Italy-(http://twas.ictp.it/) for research on extraction of biopolymer from prawn shell and sea weeds for use as plant growth stimulator (completed).
  7. Received twice 1,50,000 BDT each from the University Grants Commission of Bangladesh for research on biomaterials (on going).
  8. Obtained 250000 Japanese yen grant from Inoue Science Foundation, Tokyo, Japan for research during PhD research in Kumamoto University, Japan (completed).

 

Publications

a) Contribution to Books (International)

  1. Rahman M.M. (2014):Gelatin: Tissue Engineering, in Encyclopedia of Biomedical Polymers and Polymeric Biomaterials, Edited by Munmaya K. Mishra DOI: 10.1081/E-EBPP-120050034, Taylor and Francis LLC, New York, USA, 2014.
  2. Rahman M. M., Rashid, T. U., Datta A. (2014): Chitosan: Processing and Modification, inEncyclopedia of Biomedical Polymers and Polymeric Biomaterials, Edited by Munmaya K. Mishra, DOI: 10.1081/E-EBPP-120050033, Taylor and Francis LLC, New York, USA, 2014.
  3. Rahman, M.M., Rashid, T.U. (2013): Impact of high energy irradiation on chitin and chitosan: a short review, inCrustaceans: Structure, Ecology and Life Cycle, Editors: Gennaro Sisto, ISBN: 978-1-62417-317-2, Nova Scientific Publisher Inc. NY, USA, Pages: 37-70.
  4. Rahman, M. M., Takafuji, M., Ihara, H. (2011):Noncrystalline L-Phenylalanine-Silica Hybrid Composite Materials for High Selective Reversed Phase Liquid Chromatography, In Composite Materials / Book 2, ISBN: 978-953-307-1098-3, Ed. Dr. John Cuppoletti, Intech Open Access Publisher, Croatia, 17, 341-354.
  5. Mallik, A. K.,Rahman, M. M., Takafuji, M., Nagaoka, S., Ihara, H. (2010): Self-assembled Organic Phase for RP-HPLC: inEncyclopedia of Chromatography, Ed. Jack Cazes, (Tayler and Francis Inc., Third Edition), 1, 2146-2156.
  6. Rahman, M. M., Takafuji, M., Rana, A. A., Mallik, A.K., Gautam, U.G., Ihara, H.(2009):Chromatographic Analysis of Polycyclic Aromatic Hydrocarbons by p-Electron Containing Polymeric Organic Phase-Grafted on Silica: in Polycyclic Aromatic Hydrocarbons: Pollution, Health Effects and Chemistry, Eds. Pierre A. Haines and Milton D. Hendrickson (Nova Scientific Publisher Inc. NY, USA), 1, 31-60.
  7. Rahman, M. M. (2009): An overview of UV-cured natural fiber for polymeric-matrix reinforcements: surface modifications and its effect on fibers’ physico-mechanical properties: inRecent Research Development in Applied Polymer Science  S.G. Pandalai (Research SignPost), 4, 1-29.

 

b) In Referred Journals (International):

  1. Bhuiyan, M. A. R.,Rahman, M. M., Shahid, A., Khan, M. A. (2014): Decolorization of textile wastewater by gamma irradiation and its reuse in dyeing process. Desalination and Water Treatment, pp 1-8. doi: 10.1080/19443994.2014.905977
  2. Rahman, M. M., Afrin, S., Haque, P. (2014):Characterization of crystalline cellulose of jute reinforced poly (vinyl alcohol) (PVA) biocomposite film for potential biomedical applicationsProgress in Biomaterials, 3:23, pp 1-9. DOI 10.1007/s40204-014-0023-x.
  3. Mallik, A. K., Guragain, S., Hachisako, H.,Rahman, M. M., Takafuji, M., Ihara, H., (2014): Tuning of the molecular orientation of gel forming compounds and their effect on molecular-shape selectivity in liquid chromatographyJournal of Chromatography A,1324, pp.149-54.
  4. Rashid, T.U.,Rahman, M. M., Shamsuddin, S. M., and Khan, M. A. (2014): Evaluation of Fat Binding Capacity of Gamma Irradiated Chitosan Extracted from Prawn ShellSoft Materials, 12(3), 262-267, DOI: 10.1080/1539445X.2014.880720.
  5. Islam, M.M., Zaman, A., Islam, M. S., Khan, M. A. andRahman, M. M. (2014): Physico-chemical characteristics of gamma-irradiated gelatinProgress in Biomaterials, 3, 21, DOI 10.1007/s40204-014-0021-z.
  6. Rahman, M. M., Afrin, S., Haque, P., Islam, M. M., Islam, M. S. and Gafur, M. A. (2014):Preparation and characterization of jute cellulose crystals-reinforced poly (L-lactic acid) (PLA) biocomposite for biomedical applicationsInternational Journal of Chemical Engineering Volume 2014, Article ID 842147, 7 pages.
  7. Islam, M.S., Mustafa, A. I., Gafur, M. A., Khan, M. A. andRahman, M. M. (2014): Preparation and characterization of cellulose-gelatin nanocomposite isolated from jute for biomedical applicationMaterials Science-An Indian Journal11(3), pp 105-112.
  8. Rahman, M. M., Pervez, S., Nesa, B., Khan, M. A. (2013):Preparation and characterization of porous scaffold composite films by blending chitosan and gelatin solutions for skin tissue engineeringPolymer International, 62 (1), 79-86.
  9. Rahman, M. M., Kabir, S., Rashid, T., Nesa, B., Nasrin, R., Haque, P., Khan, M. A. (2013):Effect of gamma-Irradiation on the Thermomechanical and Morphological Properties of Chitosan obtained from Prawn Shell: Evaluation of Potential for Irradiated Chitosan as Plant Growth Stimulator for Malbar spinachRadiation Physics and Chemistry, 82, 112-118.
  10. Rashid,T.U.,Rahman, M. M., Shamsuddin, S.M., Khan, M.A. (2012): A new approach for the preparation of chitosan from g-irradiation of prawn shell: effects of radiation on the characteristics of chitosanPolymer International, 61, 1302-1308.
  11. Khan, M.K.,Rahman, M. M., Nesa, B., Nasrin, R., Molla, S., Islam, M. M., Rashid, T., Haque, P., Mustafa, A. I., Khan, M. A. (2012):Preparation and characterization of poly (ethylene glycol) grafted Ca-alginate fibers by g-irradiation for biomedical applicationsJournal of Adhesion Science and Technology, 1-11.
  12. Pervez S.,Rahman, M. M., Khan, M.A.H., Khan, M.A., Islam, J.M.M., Ahmed, M., Rahman, M.F., Ahmed, B. (2012): Preparation and characterization of artificial skin using chitosan and gelatin composites for potential biomedical applicationPolymer Bulletin,69, 715-731.
  13. Rahman, M.M., Karim, R., Mustafa, A.I., Khan, M. A. (2012):Preparation and Characterization of Bioblends from Gelatin and Linear Low Density Polyethylene (LLDPE) by Extrusion MethodJournal of Adhesion Science and Technology. 261281-1294.
  14. Hoque, Q. M. I., Islam, R., Islam, M. M., Rashid, T. U., Afrin, S., Zaman, M. A., Mustafa, A. I.,Rahman, M. M., Khan, M. A. (2012):Preparation of Rayon Fiber-Reinforced Polypropylene Composites by Extrusion TechniquesPolymer-Plastics Technology and Engineering51, 116-121.
  15. Rahman, M.M., Takafuji, M., Ihara, H. (2011):Comparison of Chromatographic Performance for L-Phenylalanine-Derived Organic Phases on Silica by “Grafting from” and “Grafting to” StrategiesAmerican Journal of Analytical Chemistry2, 795-808.
  16. Khan, M. A., Rahman, Islam, R., Islam, T., Nigar, F., Rahman, N.,Rahman, M. M., Mustafa, A. I. (2010): Effect of UV and Gamma Radiation on the Mechanical and Degradation Properties of LLDPE-Clay Composites. Advanced Materials Research123-125, 415-418.
  17. Khan, R. A., Zaman, H. U., Khan, M. A., Nigar, F., Islam, T., Islam, R., Saha, S.,Rahman, M. M., Mustafa, A. I., Gafur, M. A. (2010):Effect of the Incorporation of PVC on the Mechanical Properties of the Jute-Reinforced LLDPE CompositePolymer-Plastics Technology and Engineering49, 707-712.
  18. Ihara, H., Kubota, S., Uchimura, A.,Rahman, M. M., Takafuji, M., Nagaoka, S. (2009): A facile preparation method of self-assembled monolayer with silica particles on polystyrene-based microspheresMaterials Chemistry and Physics114, 1-5.
  19. Rahman, M. M., Takafuji, M., Ihrara, H. (2009):Evaluation of selectivity for L-glutamide-derived highly-ordered assemblies immobilized silica in RP-HPLCTalanta77, 1228-1237.
  20. Rahman, M. M. (2009):UV-cured henequen fibers as polymeric matrix reinforcement: studies of physico-mechanical and degradable propertiesMaterials & Design30, 2191-2197.
  21. Rahman, M. M., Mallik, A.K., Takafuji, M., Ihara, H. (2008):Polymer-silica composite materials from octadely-phenylalanine-derivative by surface initiated atom transfer radical polymerizationSoft Materials6, 140-155.
  22. Czaun, M.,Rahman, M. M., Takafuji, M., Ihara, H. (2008): Molecular shape recognition-structure correlation in a phenylalanine-based polymer-silica composite by surface-initiated atom transfer radical polymerizationPolymer49, 5410-5416.
  23. Rahman, M. M., Takafuji, M., Ihara, H. (2008):Synthesis and assessment of molecular recognizability in RP-HPLC by N-alkylated b-Ala-L-Phe derivative with self-assembling ability. Analytical and Bioanalytical Chemistry392, 1197-1208.
  24. Rahman, M. M., Takafuji, M., Ihara, H. (2008):Preparation, telomerization, immobilization and Application of N-alkyl L-phenylalanine-derived polymerizable organogelator for reversed-phase high-performance liquid chromatographyJournal of Chromatography A1203, 59-66.
  25. Czaun, M.,Rahman, M. M., Takafuji, M., Ihara, H. (2008): Surface-initiated living radical polymerization of self-assembling L-phenylalanine-derived monomer from silica for RP-HPLC application. Journal of Polymer Science-Part A Polymer Chemistry46, 6664-6671.
  26. Rahman, M. M., Czaun, M., Takafuji, M., Ihara, H. (2008):Synthesis, self-assembling properties, and atom transfer radical polymerization of an alkylated L-phenylalanine-derived monomeric organogel from silica: a new approach to prepare packing materials for high-performance liquid chromatographyChemistry-A European Journal14, 1312-1321.
  27. Mallik, A. K.,Rahman, M. M., Czaun, M., Takafuji, M., Ihara, H. (2008): Facile synthesis of high-density poly (octadecyl acrylate)-grafted silica for reversed-phase high-performance liquid chromatography by surface initiated atom transfer radical polymerizationJournal Chromatography A1187, 119-127.
  28. Islam, M. N., Gani, M. A., Hoq, M. A., Khan, M. A., Mustafa, A. I.Rahman, M. M.: (2008): Enhancement of mechanical properties of grafted jute yarn by methylmethacrylate (MMA) monomer through UV radiation method. Journal of the Bangladesh Chemical Society20, 13-18.
  29. Mallik, A. K.,Rahman, M. M., Czaun, M., Takafuji, M., Ihara, H. (2007): A new route for preparation of high-density organic phase to high selective HPLC by atom transfer radical polymerization of octadecyl acrylate on silicaChemistry Letters36, 1460-1461.
  30. Rahman, M. M.,Khan, M. A. (2007): Surface treatment of coir (Cocos nucifera) fibers and its influence on the fibers' physico-mechanical propertiesComposites Science and Technology67, 2369-2376.
  31. Rahman, M. M.,Mallik, A. K., Khan, M. A. (2007): Influences of various surface pretreatment on mechanical and degradable properties of photografted oil palm fibersJournal of Applied Polymer Science105, 3077-3086.
  32. Rahman, M. M., Ahmed, F., Chowdhury, Z. Z., Chowdhury, A. M. S., Khan, M. A. (2007):Enhanced physico-mechanical properties of EGDMA treated locally produced jute clothes by thermal curing methodPolymer Plastics Technology and Engineering46, 713-720.
  33. Rahman, M. M., Chowdhury, A. S. M., Ahmed, F., Khan, M. A. (2007):Modification of jute yarn with HEMA by thermal curing method. Polymer Plastics Technology and Engineering46, 507-513.
  34. Gopal, V., Prasad, T. K., Rao, N. M., Takafuji, M.,Rahman, M. M., Ihara, H. (2006): Synthesis and in vitro evaluation of glutamide-containing cationic lipids for gene delivery. Bioconjugate Chemistry17, 1530-1536.
  35. Rahman, M. M., Takafuji, M., Ihara, H. (2006):Retention mechanism of L-glutamide derived non-crystalline stationary phase in reversed phase high performance liquid chromatography and application for separation of nucleic acid constituentsJournal of Chromatography A1119, 105-114.
  36. Rahman, M. M., Chowdhury, A. M. S., Islam, J., and Khan, M. A. (2006):Surface modification of henequen (Agave fourcroydes) fibers by UV curing with 2-hydroxyethylacrylate (HEA) and ethylacrylate (EA): effect of additives on degradable properties.Journal of Applied Polymer Science102, 4000-4006.
  37. Chowdhury, A. M. S.,Rahman, M. M., Islam, M. N., Biswas, H. C., Khan, M. A. (2006): Enhancement of physico-mechanical properties of plywood surface with urethane acrylate (M-1200) by UV curing methodPolymer Plastics Technology and Engineering45, 1295-1300.
  38. Rahman, M. M., Ansarian, H. R., Takafuji, M., Ihara, H: (2005):Molecular shape selectivity through multiple carbonyl-p interactions with novel non-crystalline solid phase for RP-HPLCAnalytical Chemistry77, 6671-6681.
  39. Ansarian, H. R., Derakshan, M.,Rahman, M. M., Sakurai, T., Takafuji, M., Ihara, H. (2005): A new method for evaluation of mobility of silica-grafted alkyl chains by suspension-state 1H-NMRCanadian Journal of Chemistry83, 1792-1798.
  40. Takafuji, M.,Rahman, M. M., Ansarian, H. R., Derakshan, M., Sakurai, T., Takafuji, M., Ihara, H. (2005): Dioctadecyl L-glutamide-derived lipid-grafted silica as a novel organic stationary phase for RP-HPLCJournal of Chromatography A1074, 223-228.
  41. Ansarian, H. R., Derakshan, M.,Rahman, M. M., Sakurai, T., Takafuji, M., Taniguchi, I., Ihara, H. (2005): Evaluation of micro-structural features of a new polymeric organic stationary phase grafted on silica surface: a paradigm of characterization of HPLC-stationary phases by a combination of suspension state 1H-NMR and solid-state 13C-CP/MAS-NMRAnalytica Chimica Acta547, 179-187.
  42. Khan, M. A., Bhattacharia, S. K., Kabir, M. H., Chowdhury, A. S. M.,Rahman, M. M. (2005): Effect of mercerization on surface modification of henequen (Agave fourcroydes) fiber by photo-curing with 2-hydroxyethylmethacrylate (HEMA)Polymer Plastics Technology and Engineering44, 1079-1093.
  43. Khan, M. A.,Rahman, M. M., Habib, M. A., Mustafa, A. I. (2004): Influences of magnesium tri-silicate on the physical, mechanical, and degradable properties of ultraviolet (UV) radiation cured plain board surfaceJournal of Polymers & Environment12, 219-229.
  44. Khan, M. A., Tasneem, S. S., Habib, M. A.,Rahman, M. M. (2004): Enhancement of physical and mechanical properties of hardboard surface by photo-curing with epoxy oligomer. Polymer Plastics Technology and Engineering43, 301-318.
  45. Khan, M. A.,Rahman, M. M., Gosh, M. K., Chowdhury, T. A. (2003): Mechanical properties study of photo-cured paperboard surface treated with aliphatic epoxy diacrylateJournal of Applied Polymer Science87, 1774-1780.
  46. Khan, M. A., Siraj, M. S.,Rahman, M. M., Drzal, L. T. (2003): Improvement of mechanical properties of coir fiber (Cocus nucifera) with 2-hydroxyethyl methacrylate (HEMA) by photocuringPolymer Plastics Technology and Engineering42, 253-267.
  47. Rahman, M. M., Khan, M. A., Mustafa, A. I. (2002):Role of sand on curing of partex surface by UV radiationJournal of Applied Polymer Science86, 2385-2392.
  48. Khan, M. A.,Rahman, M. M., Bhuiyan, M. Z. R., Ahmad, M. U. (2002): Curing of crust leather by ultraviolet radiation with urethane acrylate: Role of pigment. Journal of Applied Polymer Science86, 692-697.
  49. Khan, M. A.,Rahman, M. M., Akhunzada, K. S. (2002): Grafting of different monomers onto jute yarn by in-situ UV-radiation method: effect of additivesPolymer Plastics Technology and Engineering41, 677-689.
  50. Khan, M. A.,Rahman, M. M., Bhuiyan, M. Z. R. (2002): Effect of co-monomers on the improvement of crust leather surfaces cured under UV radiationPolymer Plastics Technology and Engineering41, 541-559.
  51. Rahman, M. M., Khan, M. A., Mustafa, A. I. (2002):Curing of partex surface with epoxy acrylate using UV radiationPolymer Plastics Technology and Engineering41, 33-49.
  52. Rahman, M. M.,Khan, M. A., Mustafa, A. I. (2002): Effect of fillers on the properties of photo-cured partex surface using epoxy acrylate oligomerPolymer Plastics Technology and Engineering41, 631-644.
  53. Khan, M. A., Sherzade, S., Chowdhury, M. S. A.,Rahman, M. M. (2001): Effect of pretreatment with UV-radiation on physical and mechanical properties of photocured jute yarn with 1, 6-hexanediol diacrylate (HDDA)Journal of Polymers & Environment9, 115-124.
  54. Rahman, M. M., Khan, M. A., Uddin, M. K., Ali, K. M. I., Mustafa, A. I. (2000):Effect of CaCO3 on the performance of partex surface modification by ultraviolet radiation curing methodJournal of Applied Polymer Science81, 1558-1867.
  55. Rahman, M. M.,Khan, M. A., Ali, K. M. I., and Mustafa, A. I. (1999): Comparative studies of the photoinitiators Irgacure 369 [2-benzyl-2-dimethylamine-1-(4-morpholinophenyl) butanone-1] and its mixture with benzophenone on the curing of partex surface by UV-radiation-induced acrylate polymer. Bangladesh Journal of Scientific Research17, 229-241.

List of Presentations

  1. Czaun,M. Mizanur Rahman, M. Takafuji, H. Ihara “Synthesis and surface-initiated atom transfer radical polymerization of new L-phenylalanine-derived organogelators from mesoporous silica”Polymer Network Group Conference 2008, Larnaka, Cyprus, June 22-26, 2008.
  2. Mizanur Rahman; A. K. Mallik; M. Czaun; M. Takafuji and H. Ihara “Inorganic-organic Hybrid Materials for Chromatographic Separation Prepared by Grafting of N-Alkyl L-Phenylalanine-derived Polymerizable Organogelator on to Silica.” 32nd International Symposium on High Performance Liquid Phase Separations and Related Techniques, Baltimore, USA, May 10-16, 2008.
  3. K. Mallik;M. Mizanur Rahman; M. Czaun; Y. Abe; M. Takafuji and H. Ihara, “ATRP-based poly(octadecyl acrylate)-grafted silica for high selective RP-HPLC separation ICAST, Kumamoto, Japan, March 13-14, 2008.
  4. Mizanur Rahman; Abul K. Mallik; M. Czaun; Makoto Takafuji and Hirotaka Ihara “Enhanced Molecular Shape Selectivity by Surface-Initiated Atom Transfer Radically Polymerized Octadecyl Acrylate from Silica, Singapore International Chemistry Conference5 (SICC-5), December 16-19, 2007.
  5. Mizanur Rahman, Miklós Czaun, Abul K. Mallik, Makoto Takafuji and Hirotaka Ihara “Surface-Initiated Living Radical Polymerization of Self-Assembling L-Phenylalanine Derived Monomer from Silica: A Facile Technique for the Preparation of High-Density Chromatographic Support for RP-HPLC Application” Singapore International Chemistry Conference5 (SICC-5), December 16-19, 2007.
  6. Czaun,M. Mizanur Rahman; M. Takafuji, H. Ihara “Synthesis and surface-initiated polymerization of N-octadecyl-L-Phenylalanine-derived monomer from silica to prepare high density stationary phase for HPLC.”10thPacific Polymer Conference (PPC 10), Kobe (Japan), 2007.
  7. Takafuji;M. Mizanur Rahman and H. Ihara, “L-glutamid lipid thin layer as a biomimetic sensor for polyaromatic hydrocarbon and nucleosides” 3rd International Workshop on Biosensors for Food Safety and Environmental Monitoring, Fez, Morocco, October 10, 2007.
  8. Mizanur Rahman; M. Takafuji; H. Ihara “Glutamide-Derived Self Assembled Lipid as Novel HPLC Packing Materials: Enhanced Selectivity for Aromatic Hydrocarbons”12th IUPAC International Symposium on MacroMolecular Complexes (MMC-12),Fukuoka, Japan, August 28-31, 2007.
  9. Mizanur Rahman; Abul K. Mallik; M. Czaun; M. Takafuji; H. Ihara “Preparation of High-Density Chromatographic Organic Phase by Surface Initiated Atom Transfer Radical Polymerization for RP-HPLC”12th IUPAC International Symposium on MacroMolecular Complexes(MMC-12),Fukuoka, Japan, August 28-31, 2007.
  10. Abul K. Mallik, Mizanur Rahman, Miklos Czaun, Makoto Takafuji and Hirotaka Ihara “Surface Initiated Atom Transfer Radical Polymerization: A Facile Technique for the Preparation of High-Density Chromatographic Organic Phase for RP-HPLC” 12th Asian Chemical Congress, Kuala Lumpur, Malaysia, August 23-25, 2007.
  11. Mizanur Rahman;M. Takafuji; H. Ihara. “Glutamide derivatives as novel molecular recognitive packing materials for RP-HPLC” in the 30th International Symposium on High Performance Liquid Phase  Separations and Related Techniques (HPLC-2007), Ghent, Belgium, June 26-30, 2007.
  12. Mizanur Rahman;M. Takafuji; H. Ihara. “Molecular shape selective HPLC packing materials from glutamide derived lipid membrane analogue” in the Bangladesh Chemical Congress 06 (BCC 06), Dhaka, Bangladesh, 8-11 March, 2007.
  13. Mizanur Rahman;M. Takafuji; H. Ihara. “Molecular shape selective HPLC packing materials from glutamide derived lipid membrane analogue” in the Bangladesh Chemical Congress 06 (BCC 06), Dhaka, Bangladesh、8-11 March, 2007.
  14. Mizanur Rahman;“Molecular recognitive HPLC packing materials from highly-ordered glutamide derivatives” in the 3rd International Forum on New Waves in Supramolecular Chemistry and Suprastructured Materials, Kumamoto, Japan, December 19-20, 2006.  (Invited Lecture).
  15. Mizanur Rahman;H. R. Ansarian; T. Sakurai; M. Takafuji; H. Ihara. “Enhanced molecular shape selectivity by L-glutamide derived-lipid grafted-silica as a novel stationary phase for RP-HPLC” in the 29th International Symposium on High Performance Liquid Phase  Separations and Related Techniques, Stockholm, Sweden, June 26-30, 2005.
  16. Takafuji;M. Mizanur Rahman; H. Ihara, “Immobilization of self-assembling L-glutamide derivatives on silica for HPLC; application for higher molecular shape selectivity”, Separation Science-2005, Tokyo, Japan, July 29,2005.
  17. Mizanur Rahman;H. R. Ansarian; M. Derakshan; T. Sakurai; M. Takafuji; H. Ihara. “Synthesis and chromatographic behavior of new L-glutamide derived-lipid grafted silica as novel organic stationary phase in RP-HPLC” The 16th Japan-Korea Joint Seminar for Young Organic Chemists, Saga, Japan, November 13, 2004.
  18. Mizanur Rahman;H. R. Ansarian; M. Derakshan; T. Sakurai; M. Takafuji; H. Ihara “Characterization and Chromatographic Performance of New Double Alkyl-L-glutamide Functionalized Silica Stationary Phase in RP-HPLC” The Japan Chemical Society, Annual Meeting (west)-2004, Oita, Japan, October 30-31, 2004.
  19. Mizanur Rahman;H. R. Ansarian; M. Derakshan; T. Sakurai; M. Takafuji; H. Ihara “Enhanced Shape Discrimination by Double Alkylated L-Glutamide Phases in RP-HPLC” The  41st  chemistry related joint meeting, Kyushu Branch, Kita Kyushu, Japan, July, 2004.
  20. R. Ansarian, M. Derakshan,M. Mizanur Rahman; M. S. Chowdhury; T. Sakurai; M. Takafuji; H. Ihara “Evaluation of molecular orientation of a comb-like polymer immobilized on silica surface” The 53rd annual meeting of “The Japan Polymer Society” Kobe, Japan, May 27-28, 2004.
  21. Mizanur Rahman; H. R. Ansarian; M. Derakshan; T. Sakurai; M. Takafuji; H. Ihara “Shape selective separation of poly-aromatic hydrocarbons (PAHs) in RP-HPLC using double chain L-glutamide derived lipid grafted silica” The 65th annual meeting of the Japan Analytical Society, Okinawa, Japan, May 15-16, 2004.
  22. A. Habib; M. A. Khan;M. Mizanur Rahman; A. I. Mustafa “Improvement of Plain Board Surface with Epoxy Diacrylate by Photocuring: Effect of Additives” The 9th International Conference on Radiation Curing, Rad. Tech. Asia'03Yokohama, Japan December 9-12, 2003.
  23. Mizanur Rahman;A. I. Mustafa and M. A. Khan “Curing of Partex Surface by Photo curing: Effect of Fillers” International Seminar on Frontiers of Polymer Science and Engineering, Indian Institute of Technology, Kharagpur, India, 9-11 December, 2002.

 

Related Pages

Go to top